Akademik Yayınlar

Mindivan, H., Deveci, A., Plasma Nitriding of R260 Rail Steel for Impact-Sliding Wear Applications, Proceedings of The Institution of Mechanical Engineers Part F-Journal of Rail and Rapid Transit, 240(3), (2026), 351-360.

Mindivan, H., Microstructural Evolution and Tribological Properties of Electroless Ni-P-B and Ni-P-B-W Polyalloy Coatings, Konya Journal of Engineering Sciences, (2026).

Mindivan, H., Yazici, A. E., & Yuzgec, U., Wear Maps of The Ti-6Al-4V Alloy and a Tribo-Informatics Approach for Predicting Its Wear Rate Under Dry Sliding Conditions Using Machine Learning Algorithms, Next Research, (2025). 100710.

Mindivan, H., Sekili, T. F., & Ozturk, E. Evaluation of gas nitrocarburizing effects on impact-sliding wear behaviour of AISI H13 die steel. Gümüşhane University Journal of Science and Technology, 15(4), (2025), 1055-1064.

Deveci, A., Mindivan, H., Microstructure, Hardness and Tribological Behaviour of Plasma Nitrided R260 Rail Steel with Different Nitrogen and Hydrogen Gas Mixtures, Tribology and Materials, 4(3), (2025), 144-154.

Yazici, A.E., Tezcan, S., Mindivan, H., Influence of Low-Temperature Pack Aluminizing on The Wear Behavior of Ti-6Al-4V Alloy Using The Taguchi Method, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 239 (23), (2025), 9800-9807.

Taskan, Z., Öztürk, E., Tezcan, S., Mindivan, H., Influence of Plasma Nitriding on Tribological Performance of HVOF Sprayed AISI 316L and AISI 420 Stainless Steel Coatings, Tribology and Materials, 3(4), (2024).

Çoşkun, Ö. F., Eğercioğlu, A., Özdemir, G., Mindivan, H. The Influence of the Carburizing Process on the Impact-Sliding Wear Behavior of 14NiCr14 Steel, Eurasian Journal of Science Engineering and Technology, 5(1), (2024), 1-8.

Balkaya, I.F., Mindivan, H., Gengec, N.A., Comparison of Graphene Oxide-Titanium Oxide (GO-TiO2) Composite Film Coating Methods on Glass Substrates and Surface Characterization Study, European Journal of Technique (EJT), 14(2), 2024, 174-181.

Balkaya, I.F., Gengec, N. A., Mindivan, H. A Statistical Taguchi Method Study for Graphene Oxide-Titanium Oxide (GO-TiO) Thin Film Coating on Glass Substrates Using The Spin Coating Method, Mugla Journal of Science and Technology, 10(2), 2024, 59-67.

Mindivan, F., Mindivan, H., Bayram, A., The Electroless Monolayer and Duplex NiB and NiP Coatings for 316L Stainless Steel in Synergistic Combination of Mechanical (wear) and Chemical (corrosion) Processes, Advanced Engineering Materials, 25(10), (2023), 2201501.

Mindivan, H., High-Temperature Wear and Oxidation Behavior of Electrochemically Borided Low Carbon Steel, Journal of The Faculty of Engineering and Architecture of Gazi University, 38 (2), (2023), 937-946.

Mindivan, H., Pulsed Plasma Nitriding of High Velocity Oxy-Fuel Sprayed Inconel 625 Coatings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236 (10), (2021), 1950-1961.

Mindivan, H., A Study on The Corrosion and Tribocorrosion Behaviour of Al-30 Vol. % B4C Composite Produced by Mechanical Milling and Hot Pressing, Journal of Materials Engineering and Performance, 30 (12), (2021), 9140-9148.

Mindivan, H., Corrosion and Tribocorrosion Behaviour of WC/C Coating on Beryllium-Copper Mould Alloy, Materials Today-Proceedings, 27, (2020), 3114-3118.

Mindivan, H., Tribocorrosion Behavior of Electroless Ni-P/Ni-B Duplex Coating on AA7075 Aluminum Alloy, Industrial Lubrication and Tribology, 71 (5), (2019), 630-635.

Mindivan, H., Tribocorrosion Behaviour of Electroless Ni-P Coating on AA7075 Aluminum Alloy, Acta Physica Polonica A, 135, (2019), 1102-1104.

Mindivan, F., Mindivan, H., Microstructure and Tribocorrosion Properties of Pulsed Plasma Nitrided Cast CoCr Alloy for Dental Implant Applications, Acta Physica Polonica A, 134, (2018), 192-195.

Mindivan, H., Investigating Tribological Characteristics of HVOF Sprayed AISI 316 Stainless Steel Coating by Pulsed Plasma Nitriding, IOP Conference Series: Materials Science and Engineering, 295, (2018) 1-7.

Mindivan, F., Mindivan, H., The Study of Electroless Ni-P/Ni-B Duplex Coating on HVOF-Sprayed Martensitic Stainless Steel Coating, Acta Physica Polonica A, 131, (2017) 64-67.

Mindivan, F., Mindivan H., Darcan, C., Electroless NiB Coating of Pure Titanium Surface for Enhanced Tribocorrosion Performance in Artificial Saliva and Antibacterial Activity, Tribology in Industry, 39 (2), (2017), 270-276.

Mindivan, H., Comparative Study of Tribocorrosion Properties of Some Bio-Based Materials in Simulated Artificial Saliva, Machines, Technologies, Materials, 12, (2016) 58-60.

Mindivan, H., Wear and Corrosion Resistance of Ni-P Coating on AA7075 Aluminum Alloy, Machines, Technologies, Materials, 6, (2016) 29-31.

Mindivan, H., Investigation of Thermochemical Boriding Effect on Wear Behavior of A GGG 50 Quality As-Cast Ductile Iron, Industrial Lubrication and Tribology, 68 (4), (2016), 476-481.

Mindivan, F., Mindivan, H., Surface Properties and Tribocorrosion Behaviour of a Thermal Sprayed Martensitic Stainless Steel Coating after Pulsed Plasma Nitriding Process, Journal Advances in Materials and Processing Technologies, 2 (4), (2016), 514-526.

Mindivan, F., Yildirim, M.P., Bayindir, F., Mindivan, H., Corrosion and Tribocorrosion Behavior of Cast and Machine Milled Co-Cr Alloys for Biomedical Applications, Acta Physica Polonica A, 129, (2016), 701-704.

Mindivan, H., Study of High Temperature Abrasive Wear Behavior of Vermicular and Nodular Cast Irons, Materials Science Non-Equilibrium Phase Transformations, 3, (2015) 37-39.

Aydin, A., Oz, A., Polat, R., Mindivan, H., Effects of the Different Atmospheric Steam Curing Processes on the Properties of Self-Compacting-Concrete Containing Microsilica, Sadhana Academy Proceedings In Engineering Sciences, 40, (2015), 1-11.

Mindivan, H., Efe, A., Kosatepe,H., Kayalı, E.S., Fabrication and Characterization of Carbon Nanotube Reinforced Magnesium Matrix Composites, Applied Surface Science, 18 (2014), 234-243.

Dike, A.S., Mindivan, F., Mindivan, H., Mechanical and Tribological Performances of Polypropylene Composites Containing Multi-Walled Carbon Nanotubes, International Journal of Surface Science and Engineering, 8 (4), (2014), 292-301.

Canakci, A, Varol, T., Erdemir, F., Ozkaya, S., Mindivan, H., Microstructure and Properties of Fe-Al Intermetallic Coatings on the Low Carbon Steel Synthesized by Mechanical Alloying, International Journal of Advanced Manufacture, 73, (2014), 849-858.

Mindivan, H., Taskin, N., Kayalı, E.S., Recycling of Pure Magnesium Chips by Cold Press and Hot Extrusion Processes, Acta Physica Polonica A, 125, (2014), 429-431.

Dike, A.S., Mindivan, F., Mindivan, H., Effect of B4C Content on the Mechanical and Tribological Performances of Polypropylene, Acta Physica Polonica A, 125, (2014), 396-398.

Mindivan, H., Effects of Combined Diffusion Treatments on the Wear Behaviour of Hardox 400 Steel, Procedia Engineering, 68, (2013), 710-715.

Mindivan, F., Mindivan, H., Comparisons of Wear Performance of Hardened Inconel 600 by Different Nitriding Processes, Procedia Engineering, 68, (2013), 730-735.

Öz, A., Samur, R., Mindivan, H., Demir, A., Sagiroglu, S., Yakut, A. K., Effect of Heat Treatment on the Wear and Corrosion Behaviors of a Gray Cast Iron Coated with a Colmonoy 88 Alloy Deposited by High Velocity Oxygen Fuel (HVOF) Thermal Spray, Metalurgija Journal, 52, (2013), 368-370.

Dike, A.S., Mindivan, H., Mechanical Properties of Polypropylene Based Composites Reinforced with B4C, Advanced Materials Research, 685, (2013), 19-23.

Mindivan, H., Vatansever, R., Kayalı, E.S., Microstructure and Mechanical Properties of Dual Matrix Aluminium-Fly Ash Composites Processed via Cryomilling, Cold Compaction and Hot Extrusion, Materials Testing, 54, (2012), 700-706.

Vatansever, R., Mindivan, H., Kayalı, E.S., Fly Ash Particle Reinforced AA6061 Composites Produced by Recycling of Aluminum Chips and Fly Ash Particles, Advanced Materials Research, 324, (2011), 38-41.

Mindivan, H., Wear Behavior of Plasma and HVOF Sprayed WC-12Co+6 % ETFE Coatings on AA2024-T6 Aluminum Alloy, Surface and Coatings Technology, 204, (12-13) (2010), 1870-1874.

Mindivan, H., Reciprocal Sliding Wear Behaviour of B4C Particulate Reinforced Aluminum Alloy Composites, Materials Letters, 64 (3) (2010) 405-407.

Mindivan, H., A Study on Wear and Corrosion Behaviors of Thermally Sprayed Alumina Titania Composite Coatings on Aluminum Alloys, Kovove Materialy-Metallic Materials, 48 (2010), 203-210.

Mindivan, H., Tekmen, C., Dikici, B., Tsunekawa, Y., Gavgali, M., Wear Behavior of Plasma Sprayed Composite Coatings with in situ Formed Al2O3, Materials & Design, 30 (2009), 4516-4520.

Mindivan, H., Kayalı, E.S., Çimenoğlu, H., Tribological Behavior of Squeeze Cast Aluminum Matrix Composites, Wear, 265 (5-6), (2008), 645-654.

Mindivan, H., Kayalı, E.S., Çimenoğlu, H., The Effect of Matrix on the Mechanical Properties of Squeeze Cast Al - 50 % SiCp Composites, Materials Science Forum, 561-565, (2007), 791-794.

Mindivan,H., Baydoğan,M., Kayalı,E.S., Çimenoğlu, H., Wear Behaviour of 7039 Aluminum Alloy, Materials Characterization, 54, (2005), 263-269.

Akın, U., Mindivan,H., Samur, R., Kayalı, E.S., Çimenoğlu, H., Tribological Behaviour of Combined Coatings Deposited on Aluminium, Key Engineering Materials, 280-283, (2005), 1453-1458.

Samur, R., Mindivan,H., Çimenoğlu, H., Kayalı, E.S., Tribological Performance of Ceramic Coatings Deposited on Polymer Substrates, Key Engineering Materials, 264-268, (2004), 581-584.

Mindivan,H., Bakan, H.I., Çimenoğlu,H., Kayalı, E.S., Wear Behaviour SiC, Cr3C2 and WC Doped Alümina, Key Engineering Materials, 264-268, (2004), 469-472.

Sağlam, U., Baydoğan, M., Mindivan, H., Kayalı, E.S., Çimenoğlu,H., Influence of Retrogression and Reageing on Mechanical and Corrosion Properties of 7039 Aluminium Alloy, Zeitschrift für Metallkunde, 95, (2004), 14-17.

Mindivan, H., Çimenoğlu, H., Kayalı, E.S., Microstructures and Wear Properties of Synchronizer Rings, Wear, 254, (2003), 532-537.